Basic Info.
Max.Capacity
300-400 L/min
Position of Pump Shaft
Vertical Edge
Water Supply System
Pressure Control
Transport Package
Wooden Case
Product Description
1 Products description
Constant pressure water supply device
It is a stabilized pressure water supply device, widely used in air-conditioner, heating equipment, water distribution systems and so on. It can replace traditional expansion water tank, reduce the pump start times, and absorb part of system water swelling capacity, be easy to supply water automatically, exhaust automatically, decompression automatically and automatical overvoltage protection and so on.
operational principle
Constant pressure water supply device works depending on the system swelling characters. Its component parts mainly are capsule type constant pressure tank, pump, pressure switch, control cabinet, safety valve, underframe, connecting line and so on. When the system temperature and the water volume increase, the system pressure increases, and at this time some part of water enter into the capsule of capsule type constant pressure tank, then the capsule swells and compress the tank gas until the system pressure and tank pressure is balance. The gas expansion in tank presses the capsule water into system when the system water volumn is reduce,and system pressure falls. If the supplied water still can not meet the requirement of the water quantity needed by system, the pump start and supply water. The electro connecting pressure gauge and control cabinet control the pump opening and closing. The electric connect has two setting pressure spot, one is pump starting pressure P1, and another is closing pressure P2, P1,P2 is the lowest setting pressure spot and the maximum working pressure respectively. The control cabinet control the pump start and supply water to system after supplying water through capsule type constant pressure tank but the system pressure still can not reach P1, and the pump stop when it supplies water until the system pressure and tank pressure is greater than the P2.
Constant pressure
Air pressure tank precharge pressure 2~3 bar, constant pressure pump and pressure relief valve control the pressure and keep the change range in ±0.2bar. The swelling water flow in and flow out from constant pressure through two separated expansion pipeline.
Exhausting gas
During the exhausting process, high pressure circulating water enters into atmospheric tanks and after decompression ,gas and water separated, then the precipitated gas enter into atmosphere through exhaust valve.
Supply water
The water which is lost because of exhausting gas and pipeline leakage can be monitored constantly by control unit, and once it is lower than the setting value, it will supply water automatically. The water quantity in diaphragm tank is determined by water level sensor.
Drainage
The system water enter into basic tank because its temperature increasing result in pressure is very high, and when the basic tank water quantity exceed the preset value, it automatically drainage too much water in order to guarantee the tank will not undertake pressure.
Performance characteristics
Gas charging for one time can be used for long time, and user do not need to prepare for gas charging device.It is convenient to relocate and hide in order to reconstruct and enlarge project.Building speed is fast , construction and installation is easy, building time is short,and the construction cost is low.It can replace elevated tank and water tower, and it is benefit to structure earthquake-resistant .Reliable operation, maintenance is simple,and it is easy to management.It can weaken the water flowing noisy, the pipe resist force and the effective of water hammer.For the electric control cabinet ,modern design ,complete function, automatical control and also can be operated by hand. The fire fighting device can be added the function that the pump make routing inspection automatically and regular to prevent from rusting.Water flows in closed system, and it is not easy to be contaminated.During engineering construction, it can be used in construction first, then used in engineering so that save temporory structure cost.
Application area
Industrial water supply, urban housing area, multi-storey and high-rise buildings, water supply and irrigation in countryside, military installations, railway, dock, construction site, building in earthquake area, fire fighting water supply ,boiler room, thermal substation and every kinds of low temperature hot water heating system. It also can transport clean water which temperature is lower than 80 °C and other liquid which physical and medical characteristic is same as clean water.
Operation notice for control cabinet of submersible sewage pump
The control cabinet has two starting method:manual operation and automatic operation;
Return three position knob to manual position when the manual operation start, then press the related button to start or close.The pump running indicator light when the pump works.
When it automatically works, the float switch and pressure testing equipment needs to be connected to control cabinet according to the connecting terminal ,then return the three position knob to automatic position. The open and start for automatic working accords to the float switch and the signal of pressure testing equipment; when the pool level is satisfy the condition, the system pressure is low, then the pump is started and added pressure; when the system pressure is high, the pump is closed; when the system works automatically, and the two pump are all in good condition, different pumps will be started by turns; when one pump is brokendown, another one will work automatically, and when pump overloads, the fault indicating lamp will light.
Specification:
| NO | ITEM | SPEC. | Total volumn | Adjustment volumn | working pressure |
| THE TANK diameter*high(mm) | v(m3) | vt(m3) | (MPa) |
| 1 | WSL600 | 600*1870 | 0.35 | 0.11 | 0.6 |
| 1 |
| 1.6 |
| 2 | WSL800 | 800*2310 | 0.82 | 0.26 | 0.6 |
| 1 |
| 1.6 |
| 30.6 | 1WSL1000 | 1000*2540 | 1.4 | 0.49 | 0.6 |
| 1 |
| 1.6 |
| 4 | WSL1200 | 1200*2940 | 2.5 | 0.8 | 0.6 |
| 1 |
| 1.6 |
| 5 | WSL1400 | 1400*3060 | 3.46 | 1.2 | 0.6 |
| 1 |
| 1.6 |
| 6 | WSL1600 | 1600*3360 | 5 | 2 | 0.6 |
| 1 |
| 1.6 |
| 7 | WSL2000 | 2000*3620 | 8.53 | 3.1 | 0.6 |
| 1 |
| 1.6 |
2 Advantages of Our Production and Service:
1). Energy conservation, running stably
2)The core components of the equipment are developed by ourself so it has advantages in quality,features and service
3)Prevent unnecessary operation, save operating cost; prevent open and close frequently, prolong working life;
4)Automatical control and manual control can be converted
5). Good after-sale service. It is free for you to get the damaged spares in warranty period(1 year) if there is any questions. Assure that we can supply you spares in its all life.
6). We can arrange engineer to your company for installation and commissioning and training. If you need us at any time, we can send our technicians and prepare in a short time.
3 Factory Assurance:
1). One year parts warranty
2). Spare parts available at ex-factory price
3).100% tested before delivery
4). Engineer on-site instruction of installation and commissioning available.
4 Products photos
5.Company information:
Our company was established in 2007, and devote to the manufacturing of whole set water related equipment and related parts of the equipment.
Our company integrate automatic control system design, equipment production, and sales as a whole, and service for about ten thousand domestic customers. We make OEM for internationally renowned manufacturers. Now we make OEM production for dB, EBARA, JEREH, HYUNDAI, Nippon steel and SUMITOMO Metal, OLYMPIA BOILER, FOXCONN, Toyota. Besides, we service product not only for auto company, such as Benz, Toyota, Honda, Volkswagen GM and so on, but also for electricity company and tire industry enterprises, taking for example, Hitach, Panasonic, Canon, Nokia, Motorola; , Sumitomo, Bridgestone and so on.
Our company cover over 30000 square meters, has more than 200 people, and about more than 60 persons take up technical research and development jobs. Our company has been approved by ISO9000, ISO14000, and ISO18000 and so on. We has established good relationship with our customers and has built up good reputaion.
Welcome your inquiry.
Yantai Wenhuachengfeng General Machinery Parts Co., Ltd.
Tel: +86-535-2137879
Fax: +86-535-2137898
6 Delivery
7 Company Certification
FAQ
1. Q: How long can we deliver goods?
A: 15-25days after payment.
2. Q: Where are our main markets?
A: Our main market are North and South America, Southeast Asia, the Middle East, Africa.
3. Q: What payment terms can you accept?
A: We can accept T/T, L/C etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have very professional technical group who can design the special products according to your basic parameter/ data sheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are direct manufacturer leader in China, one manufacturing center is located in Yantai, Shandong Province
6. Q: Is OEM order acceptable to your company?
A: OEM is OK.
Address:
No. 59 Mingquan Road, Information Industrial New and High-Tech Zone, Fushan Area, Yantai, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Electrical & Electronics, Furniture, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Our company was established in 2007, and focus on the supplyling of complete set of water related equipment and related parts of the equipment, such as water pump, water supply system for high rise building, water treatment equipment, valve, pressure vessel, and HVAC products, heat exchanger, condenser, evaporator and so on.
Besides, our company undertakes metal fabrication parts, panel beating, sheet-metal working, laser cutting, stainless steel processing and so on. We are good at making customized production. Recently, we make stainless steel processing for a Germany famous brand-STOBA, and we researched and developed the accessories products, produce and supply to our cooperators, such as the product of metal thread sealant. It is widely used by our customers, and has been proved the good performance. We did not get one complaint for its performance until now.
Our company covers over 3000 square meters, has more than 200 employees, and including more than 60 staffs specializing in research and development. Our company has got the certificate of ISO9000, ISO14000, and ISO18000 and so on. We keep good cooperations with our partners.
We look forward to your inquiry and achieve win-win.
Yantai Wenhuachengfeng General Machinery Parts Co., Ltd.
Tel: +86-535-2137879
Fax: +86-535-2137898
