Basic Info.
Usage
Industrial, Home, Agriculture, Hospital
Transport Package
Container
Product Description
Product description:
Function
1.sewage lifting device can lift and transport below the sewer or municipal waste water pipe network.
2. resolve, to avoid the traditional problems of the sump.
Advantages
1.Easy to install
Sewage lifting device installation requires only simple docking device inlet, outlet, power can be stabilized, very easy to install.
2.Prevent burnout from overheat
The sewage pump equipped with the vortex impeller without clogging for pump mud; Equipped with vent bolt on the flow route of volute casing is to prevent air lock ensuring the pump operation ssteady.
3. Tank debris without precipitation
When the pump starts, the solid-liquid separation device is automatically routed to the outdoor septic tank debris; at the same time,with a high pressure water began to wash the bottom of the tank, so it stir some fine silt and sewage water uniform, was promoted to the outdoors with the water pipe network, without manual clean-up.
4. Avoid the smell of overflowing
We all have the experience of not able to wash without water bathroom : When so the next day then rinse, find the bathroom smell very heavy. The reason is fermented feces. Therefore, the water tank is not too large, and then gauge the precise level control through the sewage, dirt timely discharge, avoid prolonged stay fermentation odor. Coupled with the sealing pad and ventilation measures to make the device work absolutely no smell.
5.Reasonable control device works
Pump stops when the water level reaches a high level when the pump starts drainage, reaching a low level; when the water level reaches the next starting level, the other pump starts drainage. Two pumps alternately switching each other back, safe and reliable, two pumps when the water level is too high and start draining the tank to ensure water does not diffuse out.
Working Principle
After waste water by sewage lifting unit gravity inlet into the collecting tank, collecting tank reaches the start level, the pump starts automatically upgrade wastewater discharged into the municipal pipe network.
Introduction
Sewage lifting device for sewage is also called wastewater lifting station. It is with the characteristics of solid-liquid separation, backwash, integrated,intelligent.
Sewage lifting device is facility of drainage,it is widely used in basement,ship,cars,where is far from stack drainage system.This facility is capable of bathroom sewage water collection and treatment.
We build bathroom in the basement.In this case, there are two solutions: one is a sump in the basement under the ground, to collect sewage together, then upgrade to the outside row with underground sewage pump wells; Another method is to let the toilet sewage discharged into the outdoor underground artesian wells, pump upgrade sewage manholes into nearby wells with submersible pumps. The first method has two shortcomings: a. there is fecal sewage and other solid substances, long-term clean-up, easy to cause clogging; b. airtight sump bad smell, sanitary condition is bad. Shortcomings for the second method: need to build outdoor pump wells, deeper depth, larger investment, the management is not easy. In addition, the building will encounter bathroom set upper and lower dislocation, so the bathroom is far away from standpipe drain, but they can not drain standpipe case suspended under the floor, this time commonly used method is thicker floor mat, will drain branch pipe buried in the cushion to a certain slope into the drain standpipe. This cushion thicker, sometimes up to 350-400mm, for toilet use.
Under the premise of increasing scarcity of urban land, the underground part of the building utilization in life and business activities is increasing. Original underground sewage storage and disposal facilities not only outdated technology, high failure rate, maintenance difficulties, and in periodic clean-up, dirt and sewage smell emanating serious pollution of the surrounding environment, while precipitates produced poisonous gases damage caused by maintenance personnel have also occurred. Therefore, existing facilities can not meet the modern life and business activities plus environmental requirements.
Therefore, the sewage lifting unit would thus produced. Sewage lifting unit is "underground sewage discharge device," "split debris separator device" and other technology and PLC control "successful crystallization supporting its application, completely solve the long-standing underground sewage storage building, promotion and discharge process extremely environmentally friendly is a major problem.
Features
1, sewage collecting tank is made of stainless steel, corrosion durability, beautiful appearance.
2, all-closed water tank, roof can be opened, no odor, sewage overflows and odor.
3, sewage pump sewage lifting unit using the brand sewage submersible pumps, reliable performance and long service life.
4, The use of solid-liquid separation, the debris blocking at the net, sewage into the tank, the debris does not contact the pump impeller, the discharge of debris together to start discharging sewage pump sewage.
5, automatic control, when the cabinets level is high, the float level switch signals, sewage pumps and drainage work, until reduced to a low level; if the water flow is big, a single pump is not good enough, it will start the other pump, two pumps simultaneously drainage. Work usually is a sewage pump (2 sewage pumps alternate work).
Company information:
Yantai Wenhuachengfeng general machinery parts Co., Ltd. Located in yantai, shandong province, China. It is invested by Beijing wenhuachengfeng Science and Technilogy Co., Ltd., and it is a Sino-Japanese joint venture enterprise. The registered capital is $5, 000, 000, project investment is $11, 000, 000, and it covers 30, 000 square meters.
Product range:
Our company is an integrative enterprise, mainly design, develop, manufacture and install pressure vesssel,water treatment equipment(including RO Water Treatment Equipment,constant pressure water equipment,Non-Negative Pressure Water System,Frequency Convertion Water Equipmentand so on), sewage water treatment equipment ,stainless steel storge tank and more.Our subsidiary company-Yantai GU HE Electric Equipment Co.,LTD.produce elctric control cabinet,includes EU Standard,Japan standard,and so on.
Besides, our subsidiary company also produce the related products, recently they developed a kind of special industrial anaerobic adhesive, we called it "salad sealant",because it is with low viscosity like salad and can achieve the effect we need.Its mainly component is unsaturated acrylic acid, with non-adhesive and low viscosity.
Our expertise includes working with nearly every component and material used in Processing today, including most types of steel, metal alloys,and others.
Customized:
We accept customized designs, and we make OEM &ODM procuctions.
We established good relationship with our customers and has built up good reputaion. Welcome your inquiry.
Certification:
Address:
No. 59 Mingquan Road, Information Industrial New and High-Tech Zone, Fushan Area, Yantai, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Electrical & Electronics, Furniture, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Our company was established in 2007, and focus on the supplyling of complete set of water related equipment and related parts of the equipment, such as water pump, water supply system for high rise building, water treatment equipment, valve, pressure vessel, and HVAC products, heat exchanger, condenser, evaporator and so on.
Besides, our company undertakes metal fabrication parts, panel beating, sheet-metal working, laser cutting, stainless steel processing and so on. We are good at making customized production. Recently, we make stainless steel processing for a Germany famous brand-STOBA, and we researched and developed the accessories products, produce and supply to our cooperators, such as the product of metal thread sealant. It is widely used by our customers, and has been proved the good performance. We did not get one complaint for its performance until now.
Our company covers over 3000 square meters, has more than 200 employees, and including more than 60 staffs specializing in research and development. Our company has got the certificate of ISO9000, ISO14000, and ISO18000 and so on. We keep good cooperations with our partners.
We look forward to your inquiry and achieve win-win.
Yantai Wenhuachengfeng General Machinery Parts Co., Ltd.
Tel: +86-535-2137879
Fax: +86-535-2137898